1. Double Sockets
Allows user to put a Loc-Line® connector on both ends
  • Can be used to connect coolant fed tooling
  • Allows attachment of a non-Loc-Line® nozzle
    >>Learn more
    • Close
    2. Flare Nut Fittings
    Allows users to replace flared copper tube fittings and copper tube with Loc-Line® fittings and hose. Loc-Line® won't fatigue like copper.
  • A popular fitting for air applications in the printing industry
  • 3/8" Flare nuts fit to 5/8 - 18 threads
  • 1/4" Flare nuts fit to 7/16 - 20 threads
    >>Learn more
    • Close
    3. 1/2" to 1/4" Y REDUCER
    Multiple nozzles can be attached to one supply line
  • Reducing Y's connect a larger supply line to two smaller hose diameters
    >>Learn more
    • Close
    3. 1/2" to 1/4" Y REDUCER
    Multiple nozzles can be attached to one supply line
  • Reducing Y's connect a larger supply line to two smaller hose diameters
    >>Learn more
    • Close
    4. Valves
    Regulate coolant or air flow to your work area
  • 1/4 turn of handle opens or closes the valve
  • Light-weight and compact for in-line use
  • Body and stem material is acetal copolymer
  • Stem seals are nitrile (Buna N)
    >>Learn more
    • Close
    5. Flare nozzles
    Spreads coolant or air over a wide area without restricting the flow volume
    >>Learn more
    Close
    6. ELBOW FITTINGS
    Attaches directly to NPT fittings where tight turns are needed
  • Allows 90° hose turns
    >>Learn more
    • Close
    7. Extended Elements & Element Clamps
    Element Clamps tighten onto any standard Loc-Line® element in the same size system
  • Extended Elements with Clamps reduce dynamic motion at higher pressures
  • Extended Elements make it easier to run longer lengths of hose
    >>Learn more
    • Close
    8. 90 Degree Nozzles
    90 Degree Nozzles allow coolant flow close to the tool
  • 90 Degree Nozzles make tight turns behind the cutter
  • Reduce view obstructions in front of the tool
  • 90 Degree Nozzles fit directly on NPT connectors in short tight spaces
  • Spray Bar Nozzles distribute coolant over a wide area with even pressure
    >>Learn more
    • Close
    9. In-line Check Valves
    Maintain fluid in the hose for the next cutting operation, thus reducing dry cutting
  • Helps elimate fluid dripping from the hose after the pump is shut off
  • Designed for short cycles between pallet changes or tool changes
    >>Learn more
    • Close
    10. 90 Degree Nozzles
    90 Degree Nozzles allow coolant flow close to the tool
  • 90 Degree Nozzles make tight turns behind the cutter
  • Reduce view obstructions in front of the tool
  • 90 Degree Nozzles fit directly on NPT connectors in short tight spaces
  • Spray Bar Nozzles distribute coolant over a wide area with even pressure
    >>Learn more
    • Close
    11. 1/4" Socket X 1/8" FNPT
    Allows users to screw on a specialty nozzle
    >>Learn more
    Close
    12. Swivel Nozzles
    Adjustable spray head features 40° range of motion over flared base
  • Evenly spaced holes for even distribution of liquids or air
  • Offset head design directs air or fluid parallel to the cutting surface
    >>Learn more
    • Close
    13. T fittings
    Connects 2 hoses from one source in a 90° configuration
  • Adds an additional outlet to Modular Manifolds
  • Boss allows easy mounting for additional hose support
    >>Learn more
    • Close
    14. Flat NOZZLES
    Provides a thin flat pattern for precise directional control of air or fluids
  • Available with slots or holes
    >>Learn more
    • Close
    15. HOSE ADAPTERS
    Allows larger ID hoses to be reduced to smaller ID systems.
  • 3/4" to 1/2" or 1/2" to 1/4"
    >>Learn more
    • Close
    16. Vacuum hose Applications
  • Soldering
  • Wet Grinding
  • Machining applications; especially mist, graphite and particles
  • Chemical odors and fumes (except acids)
  • Anti-static hose electrical properties
  • Woodworking
    >>Learn more
    • Close
    17. Loc-Line® Acid Resistant Hose
    It is excellent for rinsing cycles in plating operations.
  • Acid environments won't corrode the Loc-Line® Acid Resistant Hose because of its polyester composition. CAUTION: Loc-Line® Acid Resistant Hose is not intended for conveying acids or high pressure applications.
    >>Learn more
    • Close
    18. Shields and accessories
    Provides protection from flying chips and splashing fluids
  • Shield rotates 360 degrees
  • Two mounting options include a movable magnetic base or a direct mount
  • 1/8" thick polycarbonate
  • Filled magnetic base prevents chip entrapment
    >>Learn more
    • Close
    19. Modular Manifolds & Total Flow Control Manifolds
    Distribute coolant from one inlet to multiple outlets
  • Number of outlets can be changed simply by popping T fittings in or out of the assembly
  • Adding valves to a Modular Manifold creates the Total Flow Control Manifold
  • Regulate the flow from each line independently
  • Shut off any unnecessary lines
    >>Learn more
    • Close
    20. Tefen» Threaded Couplings & Reducers
    >>Learn more
    Close
    21. Circle Flow Nozzle Kits & Side Flow Nozzles
    Allows the user to completely encircle the cutter
  • Side Flow Nozzles can be added or subtracted to accommodate different size cutters
  • Side Flow Nozzles can be arranged in a long straight manifold
    >>Learn more
    • Close
    22. Straight Flow Nozzles
    Nozzles designed to optimize an even flow pattern over a wide area while reducing build-up at the nozzle edges.
    >>Learn more
    Close
    home
    About
    Products
    Catalog
    Distributor
    Application
    Contact
    Loc-Line
    Loc-Line


    The Loc-Line® system offers endless combinations for outstanding results. Click on the number on the picture or using the express menu below to access more information of each product.


    Search by dimension:
    Dimensioin Menu

    Accessories:
    Accessories Menu